WASCAL Academia Repository

Optimization of Solid Fuel Production by Co-Hydrothermal Carbonization of Polyvinyl Chloride and Pontederia Crassipes

Show simple item record

dc.contributor.author Asare, Solomon
dc.date.accessioned 2026-06-03T15:18:46Z
dc.date.available 2026-06-03T15:18:46Z
dc.date.issued 2023-07
dc.identifier.uri http://197.159.135.214/jspui/handle/123456789/1209
dc.description A thesis submitted to The Department of Agricultural and Biosystems Engineering, Kwame Nkrumah University of Science and Technology, Kumasi in partial fulfilment of the requirement for the degree of Master of Philosophy in Bioenegineering en_US
dc.description.abstract The chlorine content of Polyvinyl chloride (PVC) in municipal waste creates a major challenge in its disposal. Water hyacinth (WH), an invasive plant, disrupts aquatic life and impedes the movement of vessels on water bodies that they colonize. These two materials, PVC and WH however have high caloric value making them suitable to be used as a source of fuel. Hydrothermal carbonization (HTC), a method for producing solid fuel has been identified as a safe medium to remove chlorine from PVC. In this work, PVC, and WH were subjected to Co-HTC using water as the solvent. Response Surface Methodology (RSM) was used to optimize the hydrochar produced by varying the temperatures, residence time, and mixing ratios. 5 g of the feedstock was subjected to Co-HTC at temperatures 200 ℃, 230 ℃, and 260 ℃; residence time of 60 minutes, 90 minutes, and 120 minutes; and mixing ratio of PVC/WH 1:1 to 1:3. The result showed that increasing the temperature and resident time increased the dechlorination efficiency (DE) of the PVC with the highest DE at 94.3%. The mixing ratio had a minimal effect on the output variables. Increasing temperatures and residence time reduced the mass yield of hydrochar but increased their corresponding High Heating Values (HHV). The highest hydrochar yield, 70.33%, occurred at 200 ℃, the highest DE of 94.39% occurred at 260 ℃, and the highest HHV, 32.34 MJ/Kg occurred at 260 ℃. FTIR microscopy, TGA analysers, and Van Krevelen diagrams were used in analysing the thermal properties of the fuel produced. The optimal conditions predicted from the data using the RSM are temperature, 230 ℃, residence time, 86 minutes, and mixing ratio of 0.33. These parameters were used for the confirmation and validation and the HHV obtained was 27.32 MJ/Kg. The HHV is close to that of coal, implying that hydrochar produced from PVC and WH feedstocks can be a good source of fuel for domestic and industrial usage. en_US
dc.description.sponsorship The Federal Ministry of Research, Technology and Space (BMFTR) en_US
dc.language.iso en en_US
dc.publisher WASCAL en_US
dc.subject Solid fuel production en_US
dc.subject Co-hydrothermal en_US
dc.subject carbonization en_US
dc.subject Polyvinyl chloride en_US
dc.subject Pntederia crassipes en_US
dc.title Optimization of Solid Fuel Production by Co-Hydrothermal Carbonization of Polyvinyl Chloride and Pontederia Crassipes en_US
dc.type Thesis en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search WASCAL Academia


Browse

My Account